Flanagan, J.

Paper	Title	Page
DYN04	xBSM Bunch-By-Bunch Measurements in EC Conditions at CesrTA
	J. Flanagan KEK
	Measurements have been made of the bunch size and position along the train in electron cloud conditions at CesrTA. Preliminary results show a bunch size blow-up starting partway down the train, with the threshold bunch position moving forward at higher bunch currents, as would be expected for electron-cloud blow-up. The bunch-by-bunch beam profile and position data, and their Fourier power spectra, are further analyzed and presented.
	Slides
PST02	Bunch-By-Bunch Instrumentation Upgrades For CESR, Based On Requirements For The CESR Test Accelerator Research Program	88
	N. Rider, J. Alexander, M. Billing, C. Conolly, N. Eggert, E. Fontes, W. Hopkins, B. Kreis, A. Lyndaker, R. Meller, M. Palmer, D. Peterson, M. Rendina, P. Revesz, D. Rubin, J. Savino, R. Seeley, J. Shanks, C. Strohman Cornell University - CLASSE R. Holtzapple California Polytechnic State University J. Flanagan KEK
	The research focus of the CESR Test Accelerator program requires new instrumentation hardware, software and techniques in order to accurately investigate beam dynamics in the presence of electron cloud effects. These new instruments are also required to develop low emittance beam conditions which are key to the success of the damping ring design for the International Linear Collider. This poster will detail some of the architecture and tools which have been developed to support these efforts. Emphasis will be placed on the 4 nS bunch by bunch Beam Position Monitoring system as well as the 4 nS capable X-ray Beam Size Monitor.