ddisable

Temporarily disables action points

Format: 

Disables the specified action points

ddisable action-point-list [ -block number-list ]

Disables all action points

ddisable -a

Arguments: 

action-point-list

A list of the action points to disable.

-block number-list

If you set a breakpoint on a line that is ambiguous, use this option to identify the instances to disable. Obtain a list of these numbers using the dactions command.

-a

Disables all action points.

Description: 

The ddisable command temporarily deactivates action points. To delete an action point, use ddelete.

You can explicitly name the IDs of the action points to disable or you can disable all action points.

If you do not indicate a focus, the default focus is the process of interest (POI).

Command alias: 

 

Alias	Definition	Description
di	ddisable	Temporarily disables action points

Examples: 

ddisable 3 7

Disables the action points with IDs 3 and 7.

di -a

Disables all action points in the current focus.

dfocus {p1 p2 p3 p4} ddisable -a

Disables all action points associated with processes 1 through 4. Action points associated with other processes are not affected.

di 1 -block 3 4

Disables the action points associated with blocks 3 and 4. That is, one logical action point can map to more than one actual action point if you set the action point at an ambiguous location.

ddisable 1 2 -block 3 4

Disables the action points associated with blocks 3 and 4 in action points 1 and 2.