denable

Enables action points

Format: 

Enables some action points

denable action-point-list [ -block number-list]

Enables all disabled action points in the current focus

denable -a

Arguments: 

action-point-list

The identifiers of the action points being enabled.

-a

Enables all action points.

-block number-list

If you set a breakpoint on a line that is ambiguous, this option names which instances to enable. Use the dactions command to obtain a list of these numbers.

Description: 

The denable command reactivates action points that you previously disabled with the ddisable command. The -a option enables all action points in the current focus.

If you did not save the ID values of disabled action points, use dactions to obtain a list of this information.

If you do not indicate a focus, the default focus is the process of interest (POI).

Command alias: 

 

Alias	Definition	Description
en	denable	Enables action points

Examples: 

denable 3 4

Enables two previously identified action points.

dfocus {p1 p2} denable -a

Enables all action points associated with processes 1 and 2. This command does not affect settings associated with other processes.

en -a

Enables all action points associated with the current focus.

f a en -a

Enables all actions points in all processes.

en 1 -block 3 4

Enables the action points associated with blocks 3 and 4. That is, one logical action point can map to more than one actual action point if you set the action point at an ambiguous location.

denable 1 2 -block 3 4

Enables the action points associated with blocks 3 and 4 in action points 1 and 2.