
 $USE_LIST 
use Q021 k1   0.0001 -1. 1.
use Q022 k1   0.0001 -1. 1.
use Q023 k1   0.0001 -1. 1.
use Q024 k1   0.0001 -1. 1.
use Q025 k1   0.0001 -1. 1.
 $END    
         
 $CONSTRAINT_LIST
    BETA             x  target  9.016   1.0e-2 ip_l0
    BETA             y  target  48.511   1.e-6 ip_l0
    alpha             x  target  -2.117   1.0e-2 ip_l0
    alpha             y  target  -4.184  1.e-6 ip_l0
    ETA              x  target    0.0    1.e3  ip_l0
    beta            x   max      95. 1.0e1 Q023 to Q025
    beta            y   max      100. 1.0e1 Q023 to Q025
    eta             x   max      5. 1.0e1 Q023 to Q025
    beta            x   max      80. 1.0e1 Q021 to Q023
    beta            y   max      80. 1.0e-1 Q021 to Q023
    beta            x   target   53.1 1.0e1 END_LINE
    beta            y   target   3.96 1.0e1 END_LINE
    alpha            x   target   15.9 1.0e1 END_LINE
    alpha            y   target   3.53 1.0e1 END_LINE
    eta             x   target     0. 1.0e1 END_LINE
   etap             x   target     0. 1.0e1 END_LINE
    VARIABLE_LIMIT   N  MAX    0.     2.e02   GLOBAL
 $END

 &SINGLE_VARS
    N_LOOPS             = 200
    N_CYCLES            = 100
    CIRCULAR_MACHINE    = .false.
    EXCLUDE_LRBBI       = 'IP_L0', 'IP_L3'
    N_TRAINS            = 1
    N_CARS              = 1
    N_14NS_SPACE        = 1
    OPTIMIZER           = 'minidel'
!   OPTIMIZER           = 'marquardt'
!    OPTIMIZER           = 'manual'
    SYMMETRY            = 'NO_SYMMETRY'
    NONLINEARITY        = .false.
    LAT_FILE            = 'bmad.'
    PRETZEL             = .false.
    ENERGY_OFFSET       = -0.003, 0.,0.003
    SEXTUPOLE_SYMMETRY  = 'NO_SYMMETRY'
    DISP_FILE           = 'disp.dat'
    PLOT                = .true.
    FULLY_COUPLED       = .false.
    minimize_moments    = .false.
    linearize_custom    = .false.
    use_sextupole_fom   = .false.
    calculate_moments   = .false.
    calc_emitt          = .false.
    hybridize           = .false.
!    sol_com             = -1
/

 $END_FILE              ! reading of file stops here




