10/16/2007
DR Layer 35, Sector 7-9
Test the current in the HVPitWest, S6S1.10.
Voltage (V) | Current (uA) |
---|---|
500 | 1.00 |
1000 | 2.00 |
2000 | 4.02 |
2100 | 4.22 |
No high current observed. So, we need to review the previous record before doing the further jumpering work.
Put on e-log. Done.
11/02/2007
Test HV boards 1, 2, 16, 46
All labeled "Repaired 10/26/07"
- #2 (B51115, Call# 81504)
Passed 2100V for 5 minutes for all 3 bulks.
- #1 (B51126, Call# 81503)
Passed 2100V for 10 minutes for all 3 bulks.
- #16 (B51260, Call# 80763)
Passed 2100V for 10 minutes for all 3 bulks.
- #46 (B67759, Call# 80762)
Passed 2100V for 10 minutes for all 3 bulks.
Update the ModuleLog file:
Update the spareboard info page:
Post on e-log.
11/06/2007
Replace #38 with #16
The HV#38's problem:
Bulk 0 trips at 1800V after 20 secondes.
Update the Module Log
Write to E-log.
11/22/2007
Update Detector Map
Get the latest DetectorMap from GUI.
Save as:
/home/xs32/work/CLEO/service/hv/dat/solon/ HVChannelProperties_HVNormal_RUN_235.txt HVDetectorMap_HVNormal_27.txt
Update the page:
https://www.lns.cornell.edu/restricted/CLEO/RunMgmt/detectors/hv/HVDetectorMap.html
Need the Slot and Subslot info from the HVChannelProperties file.
cd /home/xs32/work/CLEO/service/hv/dat/solon/ hv update html HVDetectorMap HVChannelProperties_HVNormal_RUN_235.txt HVDetectorMap_HVNormal_27.txt
output the HVDetectorMap.tab
Next to translate to html.
11/25/2007
Translate the table into html
cd /home/xs32/work/CLEO/service/hv/dat/solon/ hv update html HVDetectorMap
Output html:
11/26/2007
Update the constants HVNoZD
solon2: hv update tag HVNoZD Please update in SessionManager: BDL Name: HVDetectorMap Tag Name: HVNoZD Version : 23 => 27 xs32_solon2% hv update tag HVNoZD -------------------------------------- CLEO-c High Voltage System -------------------------------------- Update Tag : HVNoZD up-to-date: HVDetectorMap,HVNoZD xs32_solon2%
- Constants write works now
/nfs/online/cleo31/run/tools/HVConstantsWrite
Next:
ChannelProperties update
11/27/2007
Update the constants HVNoZD cont.
solon2: hv update tag HVNoZD --upload -------------------------------------- CLEO-c High Voltage System -------------------------------------- Update Tag : HVNoZD up-to-date: HVDetectorMap,HVNoZD Uploading ... /home/xs32/work/CLEO/service/hv/dat/HVChannelProperties_209_New_HVNoZD_OFF.asc HVChannelProperties,HVNoZD_OFF version upgraded to 238. Uploading ... /home/xs32/work/CLEO/service/hv/dat/HVChannelProperties_210_New_HVNoZD_FILL.asc HVChannelProperties,HVNoZD_FILL version upgraded to 239. Uploading ... /home/xs32/work/CLEO/service/hv/dat/HVChannelProperties_211_New_HVNoZD_RUN.asc HVChannelProperties,HVNoZD_RUN version upgraded to 240. Uploading ... /home/xs32/work/CLEO/service/hv/dat/HVStateSettings_115_New_HVNoZD.asc HVStateSettings,HVNoZD version upgraded to 128. up-to-date: HVBoxConnection,HVNoZD Done.
Need to check the map GUI.
11/28/2007
Update the constants HVNoZD cont - Check the map GUI
OK.
Write message on the E-log.
- Message from Ji Li:
There seems to be mis-match. Muon sections are off. Let me try that again, some DR Cathode octants are off/disabled.
solon2: hv update tag HVNoZD hv get version HVChannelProperties HVNormal_RUN
12/03/2007
Fix the HVNoZD_OFF problem
Message from Ji Li:
You've made some mistakes in HVNoZD_OFF. Some of the DRCA channels in logic unit-15(PitEast, slot-8) are disabled. I did not change them.
Get the lates file:
solon2: hv get const HVChannelProperties HVNoZD_OFF up-to-date: /home/xs32/work/CLEO/service/hv/dat/HVChannelProperties_238_HVNoZD_OFF.asc hv get const HVChannelProperties HVNormal_OFF up-to-date: /home/xs32/work/CLEO/service/hv/dat/HVChannelProperties_237_HVNormal_OFF.asc
HVStateSettings for HVNormal is using the 227,228,229, however, the latest HVNormal(OFF) is 237.
Compare the HVNormal(OFF) 237 with 227:
hv get const HVChannelProperties 227 up-to-date: /home/xs32/work/CLEO/service/hv/dat/HVChannelProperties_227.asc hv get const HVChannelProperties 237 up-to-date: /home/xs32/work/CLEO/service/hv/dat/HVChannelProperties_237.asc
The difference in these two files:
666 HVPitEast 1469P1 S7S1 13 20 CE 1 -> 0 (227-> 237) 668 HVPitEast 1469P1 S7S1 13 22 CE 1 -> 0
Found the reason on log page:
https://www.lepp.cornell.edu/~xs32/private/hv/archives/2007/07.html#sec14
which also has the link to the original E-log.
So, update the HVNormal to the latest version just for simplicity.
hv upload HVChannelProperties /home/xs32/work/CLEO/service/hv/dat/HVChannelProperties_227.asc xs32 HVNormal_OFF Uploading ... /home/xs32/work/CLEO/service/hv/dat/HVChannelProperties_227.asc HVChannelProperties,HVNormal_OFF version upgraded to 241. hv get const HVChannelProperties 228 hv upload HVChannelProperties /home/xs32/work/CLEO/service/hv/dat/HVChannelProperties_228.asc xs32 HVNormal_FILL HVChannelProperties,HVNormal_FILL version upgraded to 242. hv get const HVChannelProperties 229 hv upload HVChannelProperties /home/xs32/work/CLEO/service/hv/dat/HVChannelProperties_229.asc xs32 HVNormal_RUN HVChannelProperties,HVNormal_RUN version upgraded to 243.
Then, do a HVStateSettings update for the HVNormal
hv update HVStateSettings HVNormal --upload HVStateSettings,HVNormal version upgraded to 129.
Now, do the update for the HVNoZD:
hv update tag HVNoZD --upload
Test the HVNormal. Reset the HVBox by pushing the red buttons for 3 seconds. OK now.
Write to E-log.
Next: Inverse DetectorMap
12/05/2007
Inverse DetectorMap
Original map page:
https://www.lns.cornell.edu/restricted/CLEO/RunMgmt/detectors/hv/HVInverseMap.html
cd /home/xs32/work/CLEO/service/hv/dat/solon/ hv update html HVInverseMap test.tab